1

Galvanic Replacement Synthesis of Metal Nanostructures: Bridging the Gap   between Chemical and Electrochemical Approaches, Accounts of Chemical   Research, 2023, 56

河南科技大学

SCI一区

2

Design of phase interface and defect in niobium-nickel oxide for   ultrafast Li-ion storage, Journal of Materials Science ＆ Technology,  2023, 147

河南科技大学

SCI一区

3

Challenges and strategies towards copper-based catalysts for enhanced   electrochemical CO2 reduction to multi-carbon products, Fuel, 2023, 332

河南科技大学

SCI一区

4

Enhanced magnetic properties of SmCo/FeCo nanocomposite magnets by doping   eutectic Sm-Ni alloy, Rare Metals, 2023, 42

河南科技大学

SCI一区

5

Towards a high-performance anode for zinc metal batteries: A   tri-functional nitrogen-defective graphitic carbon nitride material for anode   protection, Journal of Colloid and Interface Science, , 2023, 651

河南科技大学

SCI一区

6

Superior strength-plasticity synergy in a heterogeneous lamellar Ti2AlC/TiAl   composite with unique interfacial microstructure, Journal of Materials   Science ＆ Technology, 2023, 159

河南科技大学

SCI一区

7

Enhancement mechanism of carbon fiber on the current-carrying   tribological properties of Cf- Al2O3/Cu composites, wear, 2023, 530

河南科技大学

SCI一区

8

Twin-twin geometric structure effect on the twinning behavior of an   Mg-4Y-3Nd-2Sm-0.5Zr alloy traced by quasi-in-situ EBSD, Journal of Magnesium   and Alloys, 2023, 11

河南科技大学

SCI一区

9

Effect of gas pressure on microstructure and mechanical properties of   TC11 titanium alloy during supersonic fine particle bombardment, Trans.   Nonferrous Met. Soc. China, 2023, 33

河南科技大学

SCI一区

10

Numerical investigation of controllable non- uniform deformation of tailor-welded   blanks using heterogeneous pressure-carrying medium,  Thin- Walled Structures, 2023, 186

河南科技大学

SCI一区

11

Emerging bismuth-based materials: From fundamen -tals to electrochemical   energy storage applications, ENERGY STORAGE MATERIALS, 2023, 58

河南科技大学

SCI一区

12

Synthesis and application of single-atom catalysts in sulfur cathode for   high-performance lithium-sulfur batteries, CHINESE CHEMICAL LETTERS, 34

河南科技大学

SCI一区

13

Application of Ag-based materials in high performance lithium metal anode:   A review, JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2023, 133

河南科技大学

SCI一区

14

Role of grain boundary character on Bi segregation-induced embrittlement   in ultrahigh- purity copper, JOURNAL OF MATERIALS SCIENCE ＆ TECHNOLOGY, 2023, 159

河南科技大学

SCI一区

15

Quasi-in-situ study on the crystallographic lattice rotation of tantalum   during compression deformation, Journal of Materials Research and Technology,   2023, 19

河南科技大学

SCI一区

16

Design strategies for shape-controlled nanocatalysts for efficient   dehydrogenation of ammonia borane: A review, JOURNAL OF ALLOYS AND COMPOUNDS,   2023, 961

河南科技大学

SCI二区

17

Study on the phase structure of the interface zone of Cu-Al composite   plate in cast-rolling state and different heat treatment temperatures based   on EBSD, JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 24

河南科技大学

SCI二区

18

Two-dimensional acetate-based light lanthanide fluoride nanomaterials: An   ultrahigh adsorption capacity and salt-tolerance endowed by surface acetates   exchange, APPLIED SURFACE SCIENCE, 2023, 621

河南科技大学

SCI二区

19

Deeply Reconstructed NiFe Layered Double Hydroxide Nanosheets for   Efficient Oxygen Evolution Reaction, ACS Applied Nano Materials, 2023, 6

河南科技大学

SCI二区

20

Suppressing self-corrosion of Al-0.5Mg-0.08Sn anode via alloying trace Ce   or Sm, Journal of alloys and compounds, 2023, 965

河南科技大学

SCI二区

21

Codelivery of CuS and DOX into Deep Tumors with Size and   Charge-Switchable PAMAM Dendrimers for Chemo-photothermal Therapy, ACS   APPLIED MATERIALS ＆ INTERFACES, 2023, 15

河南科技大学

SCI二区

22

Suppressing interfacial side reactions of zinc metal anode via isolation   effect toward high-performance aqueous zinc-ion batteries, Nano Research, 2023, 16

河南科技大学

SCI二区

23

Enhanced interfacial bonding and mechanical properties of (TiCp+GNPs)/Cu   composites by Ti-induced GNPs/Cu interfacial modification, Journal of Alloys   and Compounds, 2023, 958

河南科技大学

SCI二区

24

Thermal and arc erosion behavior of CuCr contact material based on large   plastic deformation treatment, Journal of Materials Research and Technology, 2023, 23

河南科技大学

SCI二区

25

Study on the arc erosion resistance and mechanism of Cr- doped WCu   composites, Materials Characterization, 2023, 205

河南科技大学

SCI二区

26

Effect of laser shock peening on the corrosion   properties of Ti-6Al-3Nb-2Zr-1Mo alloy, Surface & Coatings Technology,   2022, 440

河南科技大学

SCI一区

27

An internal-oxidation-based strategy induced   high-density alumina in-situ nanoprecipitation and carbon nanotube interface   optimization for co-reinforcing copper matrix composites, Composites Part B, 2022,   229

河南科技大学

SCI一区

28

Novel degradable super-paramagnetic bone cement   with self-controlled hyperthermia ability, Materials & Design, 2022, 111

河南科技大学

SCI一区

29

Different surface modification methods and coating   materials of zinc metal anode, Journal of Energy Chemistry, 2022, 66

河南科技大学

SCI一区

30

Deformation temperature impacts on the   microstructure evolution and mechanical properties of a novel medium-heavy   alloy (MHA), Materials Science   & Engineering A, 2022, 856

河南科技大学

SCI一区

31

Effect of surface nanocrystallization produced by   laser shock processing on the corrosion fatigue behavior of 300M steel, Surface   & Coatings Technology, 2022, 439

河南科技大学

SCI一区

32

Fracture behavior of Al2O3-SiO2 castables by the   wedge splitting test and digital image correlation technique, Ceramics   International, 2022, 48（5）

河南科技大学

SCI一区

33

Co and Co9S8 nanoparticles uniformly embedded in S,   N-doped porous carbon as electrocatalysts for rechargeable zinc-air batteries,   Journal of Materials Research and Technology, 2022, 18

河南科技大学

SCI一区

34

Novel synthesis of CuW composite reinforced with   lamellar precipitates via aluminothermic reduction, Rare Metals, 2022, 41(12)

河南科技大学

SCI一区

35

Stretchable vertical graphene arrays for electronic   skin with multifunctional sensing capabilities, Chemical Engineering Journal,   2022, 431

河南科技大学

SCI一区

36

Ultrathin Superhydrophobic Flexible Tactile Sensors   for Normal and Shear Force Discrimination, ACS Applied Materials &   Interfaces, 2022, 13（46）

河南科技大学

SCI一区

37

Tribological properties of PTFE/Kevlar fabric   composites at different twill orientations, Tribology International, 2022, 174

河南科技大学

SCI一区

38

Shining light on transition metal tungstate-based   nanomaterials for electrochemical applications: Structures, progress, and   perspectives, Nano Research, 2022, 15(8)

河南科技大学

SCI一区

39

Mechanical properties and electrical conductivity   of oriented-SiC-whisker-reinforced Al2O3/Cu composites, Journal of Materials   Research and Technology, 2022, 20

河南科技大学

SCI一区

40

Multifunctional wearable strain/pressure sensor   based on conductive carbon nanotubes/silk nonwoven fabric with high   durability and low detection limit, Advanced Composites and Hybrid Materials,   2022, 5(3)

河南科技大学

SCI一区

41

Surface morphology evolution behavior and SERS   performance of Mo-Ag-Cu-Co films, Applied Surface Science, 2022, 604

河南科技大学

SCI一区

42

Effect of Zr contents and covering Ag layer on   microstructure and SERS properties of Cu nanoparticles/Cu-Mo-Zr alloy films   on flexible substrates, Applied Surface Science, 2022, 606

河南科技大学

SCI一区

43

Balancing the strength and ductility of Ti2AlC/TiAl   composite with a bioinspired micro-nano laminated architecture, Materials   & Design, 2022, 220

河南科技大学

SCI一区

44

Investigation on the in-situ reaction mechanism of   Ti2AlC/TiAl composite prepared by spark plasma sintering, Materials Characterization, 2022, 194

河南科技大学

SCI一区

45

Effects of a thermal-ultrasonic stress relaxation   process on the residual stress, mechanical properties and microstructures of   C19400 copper alloy strips, Materials Science and Engineering A, 2022

河南科技大学

SCI一区

46

Trace Ce addition for inhibiting Bi segregation   induced embrittlement in ultrahigh-purity copper, Materials Characterization,   2022, 194

河南科技大学

SCI一区

47

Trace sulfur-induced embrittlement of   ultrahigh-purity copper, Materials Science and Engineering A, 2022, 848

河南科技大学

SCI一区

48

Aging process and strengthening mechanism of   Cu-Cr-Ni alloy with superior stress relaxation resistance, Journal of   Materials Research and Technology, 2022, 19

河南科技大学

SCI一区

49

Effects of CeCu6 and Cu2S on microstructure and   properties in pure copper, Journal of Materials Research and Technology, 2022,   17

河南科技大学

SCI一区

50

Arc erosion resistance mechanism of Cf-Al2O3/Cu   composites modified by carbon fibers, Journal of Materials Research and   Technology, 2022, 19

河南科技大学

SCI一区

51

{10-12} twinning relationship in Mg-Gd-Y(-Sn)-Zr   alloys under uniaxial compression at room temperature, Materials Science and   Engineering A, 2022, 835

河南科技大学

SCI一区

52

Effect of Sm on microstructures and mechanical   properties of Mg-Gd(-Sm)-Zr alloys by hot extrusion and aging treatment, Journal   of Materials Research and Technology, 2022, 19

河南科技大学

SCI一区

53

The microstructure evolution and abnormal yield   asymmetry of extruded Mg-10Gd-0.5Zr alloy, Journal of Materials Research and   Technology, 2022, 19

河南科技大学

SCI一区

54

The evolution of Cr-rich precipitates in   Cu-0.25Cr-0.03Ti alloy induced by trace Ti element, Journal of Materials   Research and Technology, 2022, 21

河南科技大学

SCI一区

55

Strengthening mechanism of ultra-high strength   Cu–20Ag alloy wire induced by cumulative strain, Materials Science &   Engineering A, 2022, 855

河南科技大学

SCI一区

56

Effect of electric current on formability and   microstructure evolution of Cu/Al laminated composite, Journal of Materials   Research and Technology, 2022, 21

河南科技大学

SCI一区

57

Prediction of HER electrocatalyst with enhanced   performance based on atoms-doped black phosphorene: A frst-principles study, Applied   Surface Science, 2022, 604

河南科技大学

SCI一区

58

Synergy of copper Selenide/MXenes composite with   enhanced solardriven water evaporation and seawater desalination, Journal of   Colloid and Interface Science, 2022, 625

河南科技大学

SCI一区

59

Organic Macromolecule Regulated the Structure of   Vanadium Oxide with High Capacity and Stability for Aqueous Zinc-ion   Batteries, Applied Surface Science, 2022, 592

河南科技大学

SCI一区

60

Microstructure evolution and process optimization   of molybdenum rods during loose tooling forging, International Journal of   Refractory Metals and Hard Materials, 2022, 108

河南科技大学

SCI一区

61

Investigation on the WC/Cu interfacial bonding   properties: First-principles prediction and experimental verification, International   Journal of Refractory Metals and Hard Materials, 2022, 106

河南科技大学

SCI一区

62

The effect mechanism of Zn, Ni and Mn solute   elements on the WC/Cu-based filler metal interfacial properties:   first-principles calculations and experiments, Journal of materials research   and technology, 2022, 18

河南科技大学

SCI一区

63

Microstructure evolution of graphene reinforced   Cu/CeO2/Cr electrical contact materials under thermal deformation behavior,   Journal of Materials Research and Technology, 2022, 18

河南科技大学

SCI一区

64

Enhanced mechanical properties and high electrical   conductivity of copper alloy via dual-nanoprecipitation, Materials   Characterization, 2022, 195

河南科技大学

SCI一区

65

Microstructure evolution and SERS performance of self-formed   Ag nanoparticles/Ag-27.9 at% Co-8.9 at% Zr alloy films, Journal of Materials   Research and Technology, 2022,20

河南科技大学

SCI一区

66

Characterization of Mo-6Ta alloy targets and its   magnetron sputtering deposited thin film, International Journal of Refractory   Metals and Hard Materials, 2022, 103（2）

河南科技大学

SCI一区

67

Effects of Mo single-doping and Mo-Al co-doping on   ZnO transparent conductive films, Applied Surface Science, 2022,584（5）

河南科技大学

SCI一区

68

Study on the correlation between spreadability   and wetting driving force of Ni-GNSs reinforced SnAgCuRE composite solder,   Materials & Design, 2021, 212

河南科技大学

SCI一区

69

Deformation behavior characterized by   reticular shear bands and long chain twins in Mg-Gd-Nd(-Zn)-Zr alloys, Journal   of Materials Research and Technology, 2021.11. 5326-5342

河南科技大学

SCI一区

70

Graphene-based interlayer for   high-performance lithium-sulfur batteries: A review, Materials & Design,   2021, 110171

河南科技大学

SCI一区

71

Effect of Y addition on microstructure   evolution and precipitation of Cu-Co-Si alloy during hot deformation,   Materials Characterization, 2021, 18:111502

河南科技大学

SCI一区

72

Effects of SnCl2 concentration and Ti   source on the phase composition, sinterability, and microwave dielectric   properties of Zr0.8Sn0.2TiO4 ceramics by choline chloride-malonic acid deep   eutectic solvent Journal of the European Ceramic Society, 2021 41(15,   7689-7696

河南科技大学

SCI一区

73

Mechanism of texture formation in   submicron Cu thin films, Journal of Materials Research and Technology,   2021;15, 1959-1969

河南科技大学

SCI一区

74

Study on microstructure evolution of   Ti-6Al-3Nb-2Zr-1Mo alloy with bimodal structure during hot compression in the   near b region, Journal of Materials Research and Technology, 2021, 15,   1747-1758

河南科技大学

SCI一区

75

Zr-containing precipitate evolution   and its effect on the mechanical properties of Cu-Cr-Zr alloys, Journal of   Materials Research and Technology, 2021, 14: 1451-1458

河南科技大学

SCI一区

76

Improved forming accuracy through controlling   localized sheet metal deformation in the friction-assisted stretch bending   process, International Journal of Advanced Manufacturing Technology,   2021(1-12): 3635-3650

河南科技大学

SCI一区

77

Effects of strain rates on dynamic   deformation behavior of Cu-20Ag alloy, Journal of Materials Science and   Technology, 2021, 79(6) :75-87

河南科技大学

SCI一区

78

Effect of supersonic fine particle   bombardment on microstructure and fatigue properties of   Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy at different temperatures, Surface   & Coatings Technology, 2021, 421, 127473

河南科技大学

SCI一区

79

Deformation mechanisms in Al/Al2Cu/Cu   multilayer under compressive loading, Journal of Alloys and Compounds, 2021,   885

河南科技大学

SCI二区

80

Excellent mechanical properties and   high electrical conductivity of Cu-Co-Si-Ti alloy due to multiple   strengthening, Materials Science And Engineering A, 2021, 821

河南科技大学

SCI一区

81

Double-Shelled L1(2) Nano-structures   in Quaternary Al-Er-Sc-Zr Alloys: Origin and Critical Significance, Acta   Metallurgica Sinica-English Letters, 2021:34, 1277-1284

河南科技大学

SCI一区

82

Properties and precipitates of the   high strength and electrical conductivity Cu-Ni-Co-Si-Cr alloy, Journal of   Materials Science & Technology 2021, 93

河南科技大学

SCI一区

83

Effect of thermo-mechanical   processing parameters on the dynamic restoration mechanism in an   Mg-4Y-2Nd-1Sm-0.5Zr alloy during hot compression, Journal of Materials   Science and Technology, 2021. 90, 205-224

河南科技大学

SCI一区

84

Carbon nanotube-based nanomaterials   for high-performance sodium-ion batteries: Recent advances and perspectives,   Journal of Alloys and Compounds, 2021, 873, 159742

河南科技大学

SCI二区

85

Arc erosion resistance of hybrid   copper matrix composites reinforced with CNTs and micro-TiB2 particles,   Journal of Materials Research and Technology-Jmr&T, 2021, 429:118-131

河南科技大学

SCI一区

86

Organic polysulfanes grafted on   porous graphene as an electrode for high-performance lithium organosulfur   batteries, Journal of Power Sources, 2021, 341:51-58

河南科技大学

SCI一区

87

Coercivity enhancement of SmCo/FeCo   nanocomposite magnets by doping eutectic Sm-Zn alloy, Materials Letters,   2021, 284, 128965

河南科技大学

SCI二区

88

Mg(ClO4)(2)-N, N-Dimethylformamide   (Acetonitrile)/NaCl Double Electrolytes for Magnesium-Air Batteries, Journal   of Materials Engineering and Performance, 2021, 30, 1567-1576

河南科技大学

SCI二区

89

Vacancy-mediated effects for   simultaneously enhancing the Cu/graphene/Al interfacial bonding strength and   thermal conductance: a first-principles study, Journal of Materials Science,   2021, 56, 5697-5707

河南科技大学

SCI二区

90

Investigation of the retained   austenite orientation in iron precipitates of martensitic transformation:   Materials Letters, 2020, 128556

河南科技大学

SCI一区

91

Effect of Ce addition on   microstructure evolution and precipitation in Cu-Co-Si-Ti alloy during hot   deformation, Journal of Alloys and Compounds:2020.842(11):155666

河南科技大学

SCI二区

92

Study on the Mechanism of Hole Formation in Molybdenum Plate Targets,   Science of Advanced Materials, 2020, 12(11):1613-1621

河南科技大学

SCI二区

93

Effects of annealing temperature on   the interfacial microstructure and bonding strength of Cu/Al clad sheets   produced by twin-roll casting and rolling, Journal of Materials Processing   Technology, 2020, 285: 116804

河南科技大学

SCI一区

94

Nd3+ ions induced rational morphology   control of transition metal oxides for high energy storage performance,   Journal of Power Sources, 2020, 472:228599

河南科技大学

SCI一区

95

Effect of TiB2 particle size on the   material transfer behaviour of Cu-TiB2 composites, Materials Science and   Technology:2020, 1685-1694

河南科技大学

SCI二区

96

Effect of Potassium Element Content   and Crystal Form of Ammonium Tetramolybdate and Reduction Conditions on   Properties of Molybdenum Powder, Science 0f Advanced Materials, 2020:09,   1323-1331

河南科技大学

SCI一区

97

Abnormal temperature effect on   tensile strength of Mg-13Gd-2Y-0.5Zr alloy, Vacuum, 2020, 177, 109398

河南科技大学

SCI二区

98

First-principles prediction of   enhancing graphene/Al interface bonding strength by graphene doping strategy,   Applied Surface Science 2020, 517:146040

河南科技大学

SCI一区

99

Synergistic strengthening effect of   carbon nanotubes (CNTs) and titanium diboride (TiB2) microparticles on   mechanical properties of copper matrix composites, Journal of Materials   Research and Technology, 2020, 9(4): 7989-8000

河南科技大学

SCI一区

100

Effects of Cr addition on the   constitutive equation and precipitated phases of copper alloy during hot   deformation Materials & Design:2020, 191, 108613

河南科技大学

SCI一区

101

Calcium titanate micro-sheets   scaffold for improved cell viability and osteogenesis, Chemical Engineering   Journal, 2020, 389 :124400

河南科技大学

SCI二区

102

An atomic-scale investigation on the   initial precipitation behavior of nitrides in TiAl alloys, Intermetallics,   2020:121:106777

河南科技大学

SCI二区

103

Nanoscale precipitates evolution and   strengthening mechanism of the aged Cu-Mg-Fe-Sn-P-Y electrical contact wire,   Journal of Materials Research and Technology, 2020.9(3):6352-6359

河南科技大学

SCI一区

104

A   self-supported 3D aerogel network lithium–sulfur battery cathode: sulfur   spheres wrapped with phosphorus doped graphene and bridged with carbon   nanofibers, Journal of Materials Chemistry A,    2020:8:7980-7990

河南科技大学

SCI一区

105

Effect of Ti addition on   microstructure evolution and precipitation in Cu-Co-Si alloy during hot   deformation, Journal of Alloys and Compounds, 2020, 821(4):153518

河南科技大学

SCI二区

106

First-principles investigation on the   atomic structure, stability and electronic property of O(001)/B2(110)   interface in Ti2AlNb alloys, Journal of Alloys and Compounds, 2020:817(5):   152734

河南科技大学

SCI二区

107

The diffusion behaviors at the Cu-Al   solid-liquid interface: A molecular dynamics study: Results In Physics,   2020:16, 102998

河南科技大学

SCI二区

108

Graphene oxide effects on the   properties of Al2O3-Cu/35W5Cr composite, Journal of Materials Science and   Technology, 2020, 37(1);185-199

河南科技大学

SCI一区

109

Microstructural   evolution and properties of Cu-20 wt% Ag alloy wire by multi-pass continuous   drawing: Nanotechnology Reviews, 2020, 9(1):1359-1367

河南科技大学

SCI二区

110

Facile Synthesis of Antimony   Tungstate Nanosheets as Anodes for Lithium-Ion Batteries, Nanomaterials,   2019, 9(12):1689

河南科技大学

SCI二区

111

Adjustment Cu3Si growth in the   interface of annealed Cu-Zr alloy films/Si substrate to form inverted pyramid   structure, Materials Letters, 2019, 255, 126536

河南科技大学

SCI二区

112

Enhanced arc erosion resistance of   TiB2/Cu composites reinforced with the carbon nanotube network structure,   Materials & Design, 2019.183:108136

河南科技大学

SCI一区

113

Preparation and controllability of Cu   particles on annealed Mo-Cu alloy films, Materials Letters, 2019.254:175-177

河南科技大学

SCI二区

114

Tensile creep behavior and   microstructure evolution of Mg-11Gd-2Y-0.5Zr alloy, Vacuum, 2019.167:421-427

河南科技大学

SCI二区

115

Effect of Heat Treatment on   Microstructure and Mechanical Properties of Ti-6Al-4V-1.5Mn Fabricated by   Powder Metallurgy, Journal of Materials Engineering And Performance,   2019.8.19:3-10

河南科技大学

SCI二区

116

Co effects on Cu-Ni-Si alloys   microstructure and physical properties Journal of Alloys and Compounds, 2019,   797(15) :1327-1337

河南科技大学

SCI一区

117

Properties of   reduced graphene oxide for Mg-air battery, Journal of Power Sources, 2019   430(5): 244-251

河南科技大学

SCI一区

118

In-situ observation of crack   evolution in Ti/Al laminated composite, Composite Interfaces, 2019.07:1-14

河南科技大学

SCI一区

119

Effects of Ce and Y addition on   microstructure evolution and precipitation of Cu-Mg alloy hot deformation,   Journal of Alloys and Compound, 2019 781(4) :118-130

河南科技大学

SCI一区

120

Fabrication and properties of   Ni-modified graphene nanosheets reinforced Sn-Ag-Cu composite solder, Journal   of Alloys and Compounds, 2019.781:761

河南科技大学

SCI一区

121

Electrochemical   Performance of 1-Ethyl-3-Methylimidazolium Bis (Trifluoromethylsulfonyl) Imide   Ionic Liquid as Electrolyte for Primary Mg-Air Batteries.Journal of, The   Electrochemical Society 2019, 166 (6):A1103-A1106

河南科技大学

SCI一区